Series 8800 L - FOOD & BEVERAGE -

N.C. 3/2 SOLENOID VALVES - Direct action

FOOD CONTACT

Category: DIRECT ACTION SOLENOID VALVES

Ways: 3/2

Surface treatments applicable: TM3- TM4

Notes:

FKM PLUS - fluorinated technopolymer - black color

is our exclusive compound developed by our R&D department in collaboration with market leaders of exclusive and highly performing compounds.

Hardness: 80 IRHD - Temperatures: - 15 ° C ÷ + 160 ° C

Description

The solenoid valves of the 8800 L series are 2/2-way, normally closed, with stainless steel insert, synthetic ruby DN gasket, third way FKM PLUS, and 30 mm D.N. Ø14 coil

Main features

Direct action (minimum pressure not required)
Professional applications
Suitable to be cleaned inside
DN insert made of stainless steel for the maximum resistance
Synthetic ruby gasket
Third way FKM PLUS
30 mm d.n. Ø14 coil

Applications

Food & Beverage

Components

The main construction components of the solenoid valves of the 8800 L series are:

Body forged in brass EN12165-CW510L (OT57)
AISI 304 L Stainless steel sleeve
Ferritic steel cores
Springs in AISI 302 stainless steel
Seals in Synthetic ruby
Food-grade FKM PLUS for the seal between the sleeve and the valve body and for the third way
30 mm coil in class H

FKM PLUS - FLUORINATED TECHNOPOLYMER - BLACK COLOR

The FKM PLUS seal was born thanks to the study and research of our R&D department and of the laboratory dedicated to the life test of our products, combined with the collaboration with market leaders of exclusive and high-performance compounds.

The evolution that distinguishes FKM PLUS is due not only to the specific compound, but also to a research work to optimize and print the compound with a production process such that the technical characteristics are not altered.

FKM PLUS is a mixture formulated with ingredients included in the positive list of the American legislation FOOD and DRUG ADMINISTRATION (FDA) CFR thiol 21. It also guarantees compliance with the European REG Regulation. 1935: 2004

Technical data FKM PLUS:

- Hardness: 80 IRHD - Temperature- -15 ° C ÷ + 160 ° C

Installation

The solenoidvalve can be installed in any position except the one with the coil down. The ideal installation position is the one with the coil oriented upwards. Maximum cleaning of the circuit is recommended, paying attention during the assembly phase.

Description Main features Applications Components Installation