18001

N.C. PILOT OPERATED SOLENOID VALVES FOR WATER, FOR SEVERE CONDITIONS OF USE

18001 N.C. PILOT OPERATED SOLENOID VALVES FOR WATER, FOR SEVERE CONDITIONS OF USE
IP 65 CERTIFICATED

Category: INDIRECT AND MIXED ACTION SOLENOID VALVES

Ways: 2/2

Surface treatments applicable: TM1-TM4

Notes: 0

The 18001 solenoid valves for water have been designed for heavy use in which the coil is particularly stressed.
High opening differentials with large passage orifices. Stainless steel sleeve to guarantee maximum corrosion resistance. Coil isolated by gaskets for use of the device even in humid environments, possibility of versions with manual opening pin.
Thermo-hydraulic systems, autoclaves, machine tool cooling systems, washing systems, irrigation systems, fire-fighting systems, sanitation systems, pressure washers.
  • Body and cover in brass EN12165-CW617N 
  • Sleeve in AISI 304L stainless steel, welded with the fixed core
  •  Ferritic steel cores
  • Springs in AISI 302 steel 
  • Seals in: food-grade NBR, EPDM or FKM 
  • Coils 30mm class H
  • O.Ring of coil insulation in Peroxide EPDM 
  • Austenitic stainless steel cover tightening screws (A2-70) 
The valve can be installed in any position but not with the coil down. The ideal installation position is with the coil oriented vertically upwards. Maximum cleaning of the circuit is recommended, paying particular attention during the assembly phase.
8000BH
8000BH
7000-CON
7000-CON
models
18011
18011
18001
18001
18021
18021