Category: TRADITIONAL REFRIGERATION SYSTEMS
Notes:
The Series
11000 solenoid valves are designed for small A1 refrigeration systems and
are available in a normally closed configuration, with yellow brass body
and copper pipes. They are offered in straight, L-shaped, or 2- and 3-valve
block versions, to ensure installation flexibility.
The inspectable
design allows for fast maintenance, and sealing is guaranteed by a PTFE
gasket and OLAB-certified neoprene O-ring.
The tube is
made of brass, and the 22 mm Ø10 coil, with H-class insulation
(180°C), includes a double O-ring and is fixed with a rotatable clip. The coil’s
upper and lower side is further insulated through dedicated O-rings,
ensuring durability and performance over time.
The Series 11000 valves are 100% helium-tested,
CE/IMQ/UL certified (depending on the version), and designed for compatibility
with A1 refrigerants. They operate within a temperature range of –35°C
to +65°C (–31°F ÷ +149°F) and support a maximum pressure of 30 bar (435
psi).
M.O.P.D. performance depends on the orifice size: 30
bar (Ø1.2 mm), 25 bar (Ø1.5 mm), 15 bar (Ø2.0 mm). Flow rate Kv: 0.05 /
0.08 / 0.12 m³/h.
Technical features:
COMPATIBLE A1 REFRIGERANT GASES
HFC, HFO, and HFO/HFC blends: R404A, R407C, R410A, R507, R32, R134a
HFO e miscele HFO/HFC: R1234ze, R448A, R449A, R450A, R452A, R1234yf, R1233zdOur Neoprene compound gaskets have been designed and produced to be compatible with group A1 refrigerant gases (as defined in ASHRAE standard 34).However, in consideration of the infinite application variables (pressure, temperature and mixing percentages), an application check on the system is always required.
SECURE SEALING
The presence of a double O-ring on the tube ensures a perfect seal to the external environment, guaranteeing long-term protection and reliability.
BLOCK FLOW BALANCING
Each pilot mounted on the block is 100% flow-tested to ensure optimal flow balancing across all system sections.
DOUBLE THREAD MOUNTING
The block is equipped with a double thread mounting system, providing maximum installation flexibility and mechanical stability.
COIL INSULATION ENSURED
The coil insulation is guaranteed by the presence of upper and lower O-rings, shielding it from infiltration and thermal stress.
The Series
11000 solenoid valves are designed for small A1 refrigeration systems and
are available in a normally closed configuration, with yellow brass body
and copper pipes. They are offered in straight, L-shaped, or 2- and 3-valve
block versions, to ensure installation flexibility.
The inspectable
design allows for fast maintenance, and sealing is guaranteed by a PTFE
gasket and OLAB-certified neoprene O-ring.
The tube is
made of brass, and the 22 mm Ø10 coil, with H-class insulation
(180°C), includes a double O-ring and is fixed with a rotatable clip. The coil’s
upper and lower side is further insulated through dedicated O-rings,
ensuring durability and performance over time.
The Series 11000 valves are 100% helium-tested,
CE/IMQ/UL certified (depending on the version), and designed for compatibility
with A1 refrigerants. They operate within a temperature range of –35°C
to +65°C (–31°F ÷ +149°F) and support a maximum pressure of 30 bar (435
psi).
M.O.P.D. performance depends on the orifice size: 30
bar (Ø1.2 mm), 25 bar (Ø1.5 mm), 15 bar (Ø2.0 mm). Flow rate Kv: 0.05 /
0.08 / 0.12 m³/h.
Technical features:
COMPATIBLE A1 REFRIGERANT GASES
HFC, HFO, and HFO/HFC blends: R404A, R407C, R410A, R507, R32, R134a
HFO e miscele HFO/HFC: R1234ze, R448A, R449A, R450A, R452A, R1234yf, R1233zdOur Neoprene compound gaskets have been designed and produced to be compatible with group A1 refrigerant gases (as defined in ASHRAE standard 34).However, in consideration of the infinite application variables (pressure, temperature and mixing percentages), an application check on the system is always required.
SECURE SEALING
The presence of a double O-ring on the tube ensures a perfect seal to the external environment, guaranteeing long-term protection and reliability.
BLOCK FLOW BALANCING
Each pilot mounted on the block is 100% flow-tested to ensure optimal flow balancing across all system sections.
DOUBLE THREAD MOUNTING
The block is equipped with a double thread mounting system, providing maximum installation flexibility and mechanical stability.
COIL INSULATION ENSURED
The coil insulation is guaranteed by the presence of upper and lower O-rings, shielding it from infiltration and thermal stress.