Category: TRADITIONAL REFRIGERATION SYSTEMS
STUFF OF VALE FOR SAFETY VALVE
YELLOW BRASS BODY
CONTROL STEM MADE OF STAINLESS STEEL AISI 303 WITH DOUBLE HNBR OR
OLAB CERTIFICATED
SEAL IN PTFE
BRASS CAP WITH ADDITIONAL O-RING IN NEOPRENE OLAB CERTIFIED
DESIGNED FOR PROFESSIONAL REFRIGERATION SYSTEMS
PS : 52 BAR
TS : -40°C +150°C
HIGHLY ROBUST
Low Cost
SAFE: guaranteed seal
Control stem made of stainless steel AISI 303
Welding process made at OLAB using a dedicated system that guarantees a per
fect and structural weld,without damaging the seals
DOUBLE HNBR O-RING SEAL on the control stem
Brass cap complete with seal to ensure tightness under any operating conditions,
including in case of accidental damage of the stem seal
100% TESTED, with modern 100% helium plant, each valve bears the date and
serial number proving that it has passed the test and allowing traceability of the
performance data measured during testing over time
The ball valves of the 37000-FM series can be installed anywhere in the system, upstream of the safety valve. The assembly of the valve can be done independently from the flow direction of the fluid, as the ball valves are bidirectional. All models of this series can be mounted in any position. Before assembling the ball valve make sure that the system is clean. The valves are supplied open to ensure direct connection with the safety valve. The valve must be closed only after the seal has been removed by specialized personnel or an accredited body responsible for checks.
STUFF OF VALE FOR SAFETY VALVE
YELLOW BRASS BODY
CONTROL STEM MADE OF STAINLESS STEEL AISI 303 WITH DOUBLE HNBR OR
OLAB CERTIFICATED
SEAL IN PTFE
BRASS CAP WITH ADDITIONAL O-RING IN NEOPRENE OLAB CERTIFIED
DESIGNED FOR PROFESSIONAL REFRIGERATION SYSTEMS
PS : 52 BAR
TS : -40°C +150°C
HIGHLY ROBUST
Low Cost
SAFE: guaranteed seal
Control stem made of stainless steel AISI 303
Welding process made at OLAB using a dedicated system that guarantees a per
fect and structural weld,without damaging the seals
DOUBLE HNBR O-RING SEAL on the control stem
Brass cap complete with seal to ensure tightness under any operating conditions,
including in case of accidental damage of the stem seal
100% TESTED, with modern 100% helium plant, each valve bears the date and
serial number proving that it has passed the test and allowing traceability of the
performance data measured during testing over time
The ball valves of the 37000-FM series can be installed anywhere in the system, upstream of the safety valve. The assembly of the valve can be done independently from the flow direction of the fluid, as the ball valves are bidirectional. All models of this series can be mounted in any position. Before assembling the ball valve make sure that the system is clean. The valves are supplied open to ensure direct connection with the safety valve. The valve must be closed only after the seal has been removed by specialized personnel or an accredited body responsible for checks.