Category: INDIRECT AND MIXED ACTION SOLENOID VALVES
Ways: 2/2
2/2 WAYS NORMALLY CLOSED SOLENOID VALVES INDIRECT ACTION
OPENABLE FOR INSPECTION
GASKET SEAL IN NBR
EPDM -FKM
AISI 304 STAINLESS STEEL SLEEVE WITH LASER WELDED FIXED CORE
YELLOW BRASS BODY
COIL 30 MM Ø14 CLASS H COIL (180°C)
IP65 PROTECTION CLASS
DESIGNED FOR PROFESSIONAL HYDRAULIC SYSTEMS WHERE MAXIMUM RELIABILITY AND RESISTANCE ARE REQUIRED
PS: 20 BAR
TS: depend on the type of gasket used
IP65 protection class
Designed for heavy duty where the coil is particularly stressed
Maximum resistance, aisi 304 stainless steel electro-pilot with laser welded fixed core
High diffrential opening pressure with big passing hole
Reduced power with high pressures.
Thermo-hydraulic systems, autoclaves, machine tool cooling systems, washing systems, irrigation systems, fire-fighting systems, sanitation systems, pressure washers.
The valve can be installed in any position but not with the coil down. The ideal installation position is with the coil oriented vertically upwards. Maximum cleaning of the circuit is recommended, paying particular attention during the assembly phase.
2/2 WAYS NORMALLY CLOSED SOLENOID VALVES INDIRECT ACTION
OPENABLE FOR INSPECTION
GASKET SEAL IN NBR
EPDM -FKM
AISI 304 STAINLESS STEEL SLEEVE WITH LASER WELDED FIXED CORE
YELLOW BRASS BODY
COIL 30 MM Ø14 CLASS H COIL (180°C)
IP65 PROTECTION CLASS
DESIGNED FOR PROFESSIONAL HYDRAULIC SYSTEMS WHERE MAXIMUM RELIABILITY AND RESISTANCE ARE REQUIRED
PS: 20 BAR
TS: depend on the type of gasket used
IP65 protection class
Designed for heavy duty where the coil is particularly stressed
Maximum resistance, aisi 304 stainless steel electro-pilot with laser welded fixed core
High diffrential opening pressure with big passing hole
Reduced power with high pressures.
Thermo-hydraulic systems, autoclaves, machine tool cooling systems, washing systems, irrigation systems, fire-fighting systems, sanitation systems, pressure washers.
The valve can be installed in any position but not with the coil down. The ideal installation position is with the coil oriented vertically upwards. Maximum cleaning of the circuit is recommended, paying particular attention during the assembly phase.