Notes:
IMPORTANT NOTE: The orientation of swivel fittings must be performed when the device is not pressurized. If the device is pressurized, only small directional adjustments are permitted.
OLAB Fast Tech
swivel receiver valve
is engineered for professional high-pressure CO2 (R744) systems
operating safely up to 140 bar (2 030 psi). Compact, tamper-proof and
fully orientable, it is the perfect fit for tight layouts and demanding
refrigeration duties.
The Fastech
features a FastSystem swivelling cylindrical-gas connection sealed
by an OLAB-certified 100 % PFAS-FREE EPDM O-Ring, winner of the Innovation
of the Year award at ATMO Europe 2024. Every critical interface is
protected by a double EPDM O-Ring, eliminating leaks and maintaining
long-term tightness.
Its CW617N
OT58 brass body houses an AISI 303 stainless-steel closing pin
secured with twin EPDM O-Rings, while the brass cap carries an
additional EPDM seal for extra protection. The entire actuation mechanism sits
inside the body and is operated quickly with a standard open-end wrench.
The design
is anti-tampering: when the valve is fully open, the pin cannot be
withdrawn thanks to the flanged upper section of the body. Every unit is 100
% helium-tested and laser-marked with date and serial number to guarantee
full traceability of performance data over time. Fully 100 % PFAS-FREE
and CE, UL 207 certified, OLAB Fastech operates flawlessly from –50
°C to +150 °C (–58 °F to +302 °F), delivering proven safety, durability and
compliance without compromise.
Technical features:
FASTSYSTEM CONNECTION
Swivelling cylindrical gas connection with OLAB-certified 100% PFAS-FREE EPDM O-Rings, winner of the Innovation of the Year award at ATMO Europe 2024
SECURE SEALING
Guaranteed during both opening and closing operations, thanks to a double 100% PFAS-FREE EPDM O-Ring (OLAB-certified) between the body and the needle, and an additional 100% PFAS-FREE EPDM O-Ring on the brass cap for long-lasting performance.
ANTI-TAMPERING
When the valve is fully open, the pin can be pulled off thanks to the double edge-bandin of the upper part of the valve body.
COMPACT
The whole manoeuvring system is inside the valve body and the pin can be operated using an open-end wrench.
100% HELIUM TESTED
Each unit is individually tested in a state-of-the-art helium facility. Date and serial number are engraved to certify compliance and allow full traceability of recorded performance data.
OLAB Fast Tech
swivel receiver valve
is engineered for professional high-pressure CO2 (R744) systems
operating safely up to 140 bar (2 030 psi). Compact, tamper-proof and
fully orientable, it is the perfect fit for tight layouts and demanding
refrigeration duties.
The Fastech
features a FastSystem swivelling cylindrical-gas connection sealed
by an OLAB-certified 100 % PFAS-FREE EPDM O-Ring, winner of the Innovation
of the Year award at ATMO Europe 2024. Every critical interface is
protected by a double EPDM O-Ring, eliminating leaks and maintaining
long-term tightness.
Its CW617N
OT58 brass body houses an AISI 303 stainless-steel closing pin
secured with twin EPDM O-Rings, while the brass cap carries an
additional EPDM seal for extra protection. The entire actuation mechanism sits
inside the body and is operated quickly with a standard open-end wrench.
The design
is anti-tampering: when the valve is fully open, the pin cannot be
withdrawn thanks to the flanged upper section of the body. Every unit is 100
% helium-tested and laser-marked with date and serial number to guarantee
full traceability of performance data over time. Fully 100 % PFAS-FREE
and CE, UL 207 certified, OLAB Fastech operates flawlessly from –50
°C to +150 °C (–58 °F to +302 °F), delivering proven safety, durability and
compliance without compromise.
Technical features:
FASTSYSTEM CONNECTION
Swivelling cylindrical gas connection with OLAB-certified 100% PFAS-FREE EPDM O-Rings, winner of the Innovation of the Year award at ATMO Europe 2024
SECURE SEALING
Guaranteed during both opening and closing operations, thanks to a double 100% PFAS-FREE EPDM O-Ring (OLAB-certified) between the body and the needle, and an additional 100% PFAS-FREE EPDM O-Ring on the brass cap for long-lasting performance.
ANTI-TAMPERING
When the valve is fully open, the pin can be pulled off thanks to the double edge-bandin of the upper part of the valve body.
COMPACT
The whole manoeuvring system is inside the valve body and the pin can be operated using an open-end wrench.
100% HELIUM TESTED
Each unit is individually tested in a state-of-the-art helium facility. Date and serial number are engraved to certify compliance and allow full traceability of recorded performance data.