Category: INDIRECT AND MIXED ACTION SOLENOID VALVES
Ways: 2/2 N.C.
Notes:
The 18001
Series belongs to the X-TREME PLUS range, specifically designed by
OLAB for low-pressure Car Wash systems requiring high reliability,
consistent performance, and easy serviceability.
These are 2/2-way
normally closed indirect-acting valves, ideal for handling high
differential pressures even with large internal orifices.
The valve
body is made of CW510L-OT57 brass, and the AISI 304 stainless steel
sleeve, equipped with a laser-welded fixed core, ensures long-term
sealing performance under severe mechanical and thermal stress. Sealing
gaskets are available in NBR, EPDM, and OLAB-certified FKM Plus
Hi-Performance, guaranteeing compatibility with water, detergents, and
compressed air.
The core of
the electromechanical system features the 30 mm Ø14 OLAB 8000BH coil,
rated Class H (up to 180 °C / 356 °F), designed to withstand continuous
cycles, vibration, and thermal peaks. The inspectable architecture
enables quick and safe maintenance without the need to remove the valve
from the system.
The 18001
Series is CE certified and rated IP65, making it fully compliant
with European directives for electrical safety and industrial durability in
low-pressure fluid systems.
Technical features:
DESIGNED FOR LOW-PRESSURE CAR WASH SYSTEMS
Part of the X?TREME PLUS range, engineered for automatic wash systems operating under moderate pressure.
HIGH DIFFERENTIAL PRESSURE CONTROL EVEN WITH LARGE ORIFICES
The indirect-acting system handles significant pressure differences while maintaining stable and smooth operation through wide internal passages.
REDUCED POWER CONSUMPTION, MAXIMUM EFFICIENCY
Thanks to its pilot-operated structure, the valve ensures efficient actuation under pressure with low solenoid power requirements.
OLAB 8000BH COIL CLASS H FOR HEAVY-DUTY CYCLES
The 30 mm (Ø14 mm) coil is built for continuous duty, withstanding heat, vibration and high-frequency cycling without loss of performance.
INSPECTABLE DESIGN FOR EASY MAINTENANCE
The fully serviceable architecture allows internal access without removing the valve from the line, reducing downtime and simplifying technical interventions.
The 18001
Series belongs to the X-TREME PLUS range, specifically designed by
OLAB for low-pressure Car Wash systems requiring high reliability,
consistent performance, and easy serviceability.
These are 2/2-way
normally closed indirect-acting valves, ideal for handling high
differential pressures even with large internal orifices.
The valve
body is made of CW510L-OT57 brass, and the AISI 304 stainless steel
sleeve, equipped with a laser-welded fixed core, ensures long-term
sealing performance under severe mechanical and thermal stress. Sealing
gaskets are available in NBR, EPDM, and OLAB-certified FKM Plus
Hi-Performance, guaranteeing compatibility with water, detergents, and
compressed air.
The core of
the electromechanical system features the 30 mm Ø14 OLAB 8000BH coil,
rated Class H (up to 180 °C / 356 °F), designed to withstand continuous
cycles, vibration, and thermal peaks. The inspectable architecture
enables quick and safe maintenance without the need to remove the valve
from the system.
The 18001
Series is CE certified and rated IP65, making it fully compliant
with European directives for electrical safety and industrial durability in
low-pressure fluid systems.
Technical features:
DESIGNED FOR LOW-PRESSURE CAR WASH SYSTEMS
Part of the X?TREME PLUS range, engineered for automatic wash systems operating under moderate pressure.
HIGH DIFFERENTIAL PRESSURE CONTROL EVEN WITH LARGE ORIFICES
The indirect-acting system handles significant pressure differences while maintaining stable and smooth operation through wide internal passages.
REDUCED POWER CONSUMPTION, MAXIMUM EFFICIENCY
Thanks to its pilot-operated structure, the valve ensures efficient actuation under pressure with low solenoid power requirements.
OLAB 8000BH COIL CLASS H FOR HEAVY-DUTY CYCLES
The 30 mm (Ø14 mm) coil is built for continuous duty, withstanding heat, vibration and high-frequency cycling without loss of performance.
INSPECTABLE DESIGN FOR EASY MAINTENANCE
The fully serviceable architecture allows internal access without removing the valve from the line, reducing downtime and simplifying technical interventions.