Olab - Testata

SERIES 10600

DIRECT ACTION 2/2 WAYS N.C. SOLENOID VALVES, OPENABLE FOR INSPECTION, WITH STAINLESS STEEL INSERT AND SLEEVE, PTFE GASKET SEAL, AND 36 MM COIL

FLUID
SERIES 10600
CE 28384 RESISTENTI AFFIDABILI

Category: DIRECT ACTION SOLENOID VALVES

Ways: 2/2 N.C.

Notes:

  • PS: 40 BAR (580 psi)
  • TS: -40°C ÷ +180°C (–40°F ÷ +356°F)
  • CERTIFICATIONS: CE

Technical Data Sheet

The 10600 series features direct action, normally closed 2/2 ways solenoid valves that are openable for inspection. They are built with a body in forged brass EN12165-CW617N and a sleeve in stainless steel AISI 304L welded to a fixed core. The sealing DN insert is made of stainless steel AISI 303, while the cores and springs are respectively in stainless steel AISI 430F and AISI 302. The gasket seals are in PTFE, with a sleeve sealing O-ring in food-grade FKM (Viton).

The 36 mm coil belongs to class H insulation, with an operating temperature range from –40°C to +180°C (–40°F to +356°F).
These solenoid valves are designed for professional circuits where high resistance and reliability at elevated temperatures are essential. The direct action operation allows functioning without minimum inlet pressure, ensuring consistent reliability even in the absence of differential pressure. Ideal for professional use, they provide precision, durability, and consistent performance even in demanding operating conditions.

The stainless steel insert ensures maximum durability over time, enhancing wear resistance and operational stability.
The openable design facilitates maintenance and cleaning of internal components, enabling quick interventions and reducing downtime. The maximum operating pressure is 40 bar (580 psi), and the product is CE certified.  

Technical features:

  • Direct action 2/2 ways normally closed solenoid valves, openable for inspection
  • Body in forged brass EN12165-CW617N
  • Sleeve in stainless steel AISI 304L welded to fixed core
  • Sealing DN insert in stainless steel AISI 303
  • Cores in stainless steel AISI 430F
  • Springs in stainless steel AISI 302
  • Gasket seals in PTFE
  • Sleeve sealing O-ring in food-grade FKM (Viton)
  • Coil 36 mm class H insulation (180°C)
  • Designed for professional circuits where resistance and reliability at high temperatures are necessary

Water, steam, professional ironing. Other fluids after checking compatibility.

DIRECT ACTION – NO MINIMUM OPERATING PRESSURE REQUIRED
Thanks to the direct action configuration, these solenoid valves operate reliably even without differential pressure, ensuring consistent performance in any condition.

IDEAL FOR PROFESSIONAL USE

Designed for demanding environments where reliability, precision, and durability are crucial, these valves deliver stable performance in complex applications.

STAINLESS STEEL INSERT FOR MAXIMUM DURABILITY

The stainless steel sealing insert ensures excellent wear resistance, extending the operational life and reliability of the device.

OPENABLE FOR INSPECTION AND INTERNAL COMPONENT MAINTENANCE

The inspection-friendly design allows quick access for cleaning or replacing internal parts, simplifying system maintenance and reducing downtime.  

10000BH
10000BH
close
10000BH
10000BH
7000-CON
7000-CON
close
7000-CON
7000-CON